Hot beverage dispenser Hendi 211410
Technical data 01 / 02
This hot beverage dispenser holds 9 litres and is intended for water or warmed wine. Its tank capacity provides a reserve for service at a staffed drinks counter or a hotel breakfast point, reducing the need to replenish between every serving. The silver finish sits discreetly alongside other counter equipment, while polypropylene handles make the unit lighter to hold when it needs moving.
Where it is used
Use it for hot-water service or warmed wine; it is not intended for milk or hot chocolate. The non-drip tap helps keep the counter drier as cups are filled, and the magnetic drip tray can be removed to clear drips beneath the tap during clean-down. A glass water-level indicator makes the remaining supply visible, so staff can judge when a refill is due. The warning light alerts staff to overheating or a need for descaling, and a reset button provides a control to use after overheating.
Connection and installation
The 220–240 V supply range suits a standard mains-powered service point. Rated power is lower than for most products in this category, making this dispenser a useful choice where the rated-power allowance is limited; this comparison concerns rated power, not measured consumption. Thermostat indicators show operating status while the dispenser heats, giving staff a visual cue when monitoring it during service.
Care
The single-wall stainless-steel body is corrosion resistant and has a surface that is easy to keep clean, useful where water or wine may splash around a drinks station. The removable magnetic drip tray makes it easier to clear residue beneath the tap as part of counter clean-down.
How to choose
Use the 9-litre capacity to judge the reserve needed between refills, and select this dispenser for water or warmed wine rather than milk-based or chocolate drinks. Temperature adjustment from 30 °C to 100 °C lets staff set a suitable serving temperature for those intended liquids. The vessel clearance beneath the tap accommodates containers up to 100 mm high, so check that the cups or jugs used at the station can be positioned for filling.
The dispenser weighs less than most products in this category, making it easier to lift and reposition between service points. Its compact footprint also helps when allocating counter space for a dedicated hot-drink station.